Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts

Longfield Studless Hubs

$756.39 Big Country Customs $756.39

0 0 review(s)

SKU | 302583-1-KIT

Manufacturer: Trail Gear

Longfield Studless Hubs

A new, innovative, never before seen product, our Longfield™ Studless Hubs set the bar in quality and performance. The Longfield™ Studless Hub replaces the weaker, prone-to-breaking locking hubs, hub gears, and hub studs by utilizing a stud-less hub design and inner locking puck. Chances are, if you were to break the studs in your hub, the threads would be damaged and the hub would need to be replaced. With the Longfield™ Studless Hubs, you will never again need to worry about your hubs, hub gears, and hub studs breaking on the trail.

The Longfield™ Studless Hub and Inner Locking Puck are both constructed out of chromoly steel for superior strength and quality. The Longfield™ Studless Hubs are stronger than the OEM locking hubs and are designed to handle even higher torque loads than our Creeper Drive Flanges. The Longfield™ Studless Hubs will also include a full set of front wheel bearings to replace your old, worn out bearings.

Note: On 1979-1981 Toyota Pickups, you will need the following additional parts:

  • IFS Vented Rotors (part #140332-1-KIT)
  • IFS Calipers (part #140444-1-KIT & 140445-1-KIT)
  • IFS Caliper Brake Pads (part #140091-1-KIT)
  • Front Wheel Studs (part #140392-1-KIT)

Note: These will lock your front axle into 4WD. To unlock your front axle, you will need to remove the locking puck.

Specifications:

  • Stud-less hub design and inner locking puck
  • Studless Hub and Inner Locking Puck are both constructed out of chromoly steel
  • Stronger than the OEM locking hubs and are designed to handle even higher torque loads than our Creeper Drive Flanges

Note: On 1979-1981 Toyota Pickups, you will need the following additional parts:

  • IFS Vented Rotors (part #140332-1-KIT)
  • IFS Calipers (part #140444-1-KIT & 140445-1-KIT)
  • IFS Caliper Brake Pads (part #140091-1-KIT)
  • Front Wheel Studs (part #140392-1-KIT)

Note: These will lock your front axle into 4WD. To unlock your front axle, you will need to remove the locking puck.

Application Data

  • 1979-1985 Toyota Pickup, 4WD with Solid Axle
  • 1985 Toyota 4Runner, 4WD with Solid Axle
  • Rock Assault Front Axle Housing

Note: On 1979-1981 Toyota Pickups, you will need the following additional parts:

  • IFS Vented Rotors (part #140332-1-KIT)
  • IFS Calipers (part #140444-1-KIT & 140445-1-KIT)
  • IFS Caliper Brake Pads (part #140091-1-KIT)
  • Front Wheel Studs (part #140392-1-KIT)

Be the first to review this product.

Write Review

All posts are moderated and all fields are required. Your email address WILL NOT be shown on site. Only your name, review rating, title and review text will be published on the site after approval.

  • Weight : 5 LBS